C10T.14 Oil Country Lathe
Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters (up to 14”).
The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities.
| C10T10_14 | 1.91MB | |
| ZMM_catalogue_2023 | 4.67MB |
Standart machine specifications
C10T.14 |
||
|---|---|---|
Capacity | ||
| Height of centers | mm | 510 |
| Swing over bed | mm | 1020 |
| Swing over cross slide | mm | 780 |
| Width of bed | mm | 560 |
| Distance between centers | mm | 1500; 2000; 3000; 4000; 5000; 6000 |
Spindle | ||
| Spindle nose DIN 55027 | No. | A2.20 |
| Spindle bore | mm | 358 |
| Spindle taper | Metric | 318 |
Head stock | ||
| Number of spindle speeds | 12 | |
| Spindle speed ranges | rpm | 6,3 - 315 |
| Main motor power | kW | 18.5 |
Feeds | ||
| Number of feeds | 152 | |
| Longitudinal feed range | mm/rev | 0,039 - 15 |
| Cross feed range | mm/rev | 0,02 - 7,5 |
Threads | ||
| Number of threads | 64 | |
| Metric thread range | mm | 0,5 - 150 |
| Inch thread range | Tpi | 60 - 1/5 |
| Module thread range | Module | 0,125 - 37,5 |
| DP thread range | DP | 240 - 4/5 |
Carriage | ||
| Cross slide travel | mm | 510 |
| Top slide travel | mm | 280 |
Tail stock | ||
| Quill diameter | mm | 105 |
| Quill taper | Morse | No.6 |
| Quill travel | mm | 225 |
| C10T10_14 | 1.91MB | |
| ZMM_catalogue_2023 | 4.67MB |